farranya

Ok we had the game running for more than 8 hours long(maybe a lot longer I was sleep) getting played like normal and it never crashed. it was getting played through the new fallout script extender so maybe that fixed the problem somehow. This is the most stupid problem I ever seen. I never found any virus and my temperatures are very good. My graphics card never shows any problems other than crazy fan readings and I stressed test all my parts many times.    Some people on tomshardware and steam are saying it could be some sort of bug because they have the same problem but can stress test their computers and play other games with no problem.   I will just return all parts just in case.    

 I only have 1 graphics card to use. I sent RMA request to GIGABYTE 3 weeks ago and still am waiting for an answer >_>

Ok I ran furmark again and the computer rebooted itself 20 minutes in. Then I ran it again and it lasted one hour without a problem. I Also played fallout 4 with admin and windows 7 compatibility mode for 4 hours long and it never rebooted. This problem seems to just happen at random so I'm sure it is not heat. I deep clean my computer every 30 days and never seen too much dust. Also virus scans come good.   I'm thinking maybe it can be a problem with my graphics card??? It Does give crazy high fan readings on all monitoring programs. Like this.     http://s5.postimg.org/fmbzzkzxj/image.png       But when I run MSI afterburner the sensors show normal fan speeds like it should.       I think I did try to trurn off options that restarts computer on failures but it still reboots 

I have a problem with fallout 4 restarting my computer after sometime. The screen goes blank and then i get the message saying no video signal and then the computer starts again.     I have did several stress test with heaven and furmark. I also ran memtest over a whole day and cannot get the error to repeat. The temperatures are very good with the CPU only going up to 50 c and the GPU never went over 70 c. I do not think it is over heating and my power supply is brand new.      I left fall out 4 running overnight and it never rebooted. It only seem to happen when I exit buildings on the load screen. I also tried to play other games like metal gear 5, grandtheft auto 5, witcher 3, ARK survival, and skyrim heavy with mods and no reboot.     Event viewer only shows that the computer restarted unexpectedly. My computer is a Gigabyte r9-280x windforce, fx-8350, 8 gb ddr3 balistics ram, Thermaltake 80 plus gold 750 power supply, Gygabyte 970A-UD3p motherboard, haf 912 case, evo 212 cooler, segate 1 tb 7200 hard drive, windows 10 home. I also have the newer drivers I installed after removing the older one in safe mode with a program.    Some who have the same problem said they fixed it after buying new power supplies but they also said benchmark programs also cause their computers to restart but Mine does not do that. Fallout 4 is the only program that does this to my computer.

When I run any program that monitors my fans and temperatures I get very very high readings with my fans RPM. Is this a bug or a sensor problem?    Here is what it look like.  http://postimg.org/image/j5xxpe2n7/     when I run MSi afterburner and click on the small cog tool beside speed fan (user defined) it goes down to a normal speed.

Did not forget about this game. I am having a lot of bad luck because my computers parts were breaking one after another. I tried sherry but I had problems with the hair not showing up right. I had a hard drive failure and lost everything so I would need to start over with her. I still want to mod the game after I get my computer work again. 

Update.   I bought a new power supply That is 750 watt 80plus gold from thermaltake or something like that and it has been working ok for 5 days. The PC did restart by itself one time while playing fallout 4 but I'm hoping that was just a random bug since I am using older beta driver.   Thanks.

I hate quick grenade buttons and hope it can get removed or fixed to have realistic animations. It ruined games like rainbow six and gears of war but still companies keep using it in newer shooter games. It is stupid in fallout 4 because the A.I still does not care about what it is doing in fights and it can throw molotov fire bombs in the middle of shooting even if it is really close to you. They commit suicide at corners a lot. It is not balanced and it makes some of the fights cheap.

K I unplugged my graphics card completely and the PC turned on again. Just like before the PC starts working again when I pull out plugs and putthem back in. I am still doing the CCleaner scans but tdskiller found 0 threats.   I think I can narrow the problem to 2 things now. The graphics card has gone bad or the power supply has a voltage problem. @ beeknee   I also found a voltage calculator online and put in the list of parts I have and the calculation came as 650 watt on a 24/7 full load. I only have a crusair 600 watt bronze certified. Maybe that is the problem I hope. I'm going to replace both parts and try a 750 watt if I can find one affordable.

Curious but could a power lose cause the problem with windows 10 acting as if it's being loaded for the first time when booted? I don't care if another part broke down if i can just get new ones.It is that purple screen with loading circle that I am worried about because it has never did that before the problem happened.

I guess I will try a new power supply and see what happens

k sorry for slow response but now I have to use my xbox to post here and the browers really bad. my PC just shut off right as I started using that scanning program anatriax linked me to. Now It wont turn on at all. The fans just spin once and the LED lights just blink when I push the power button.   To answer your qustions I am using a gigabyte windforce R9-280x, FX-8350, free upgrade of windows 10 and the power supply box is 600 watt, gigabyte 970a-ud3p motherboard, 8 GB balistics ram. EVerything is running at stock settings. I have 5 harddrives drives 4 just formated to hold back up folders and videos . My harddrive with windows and a  back up is 1TB seggate 7200 rpm the rest are just 500GB western digital blue 5000 rpm I think. One is failing but I never use it and don't think it can do anything to my PCs performance.

A few days ago I was watching a youtube video and my PC just powered off completely as if the whole thing lost power. I did a harddrive test and found no errors and I checked my temperatures which are very good. I do not think it is a hardware problem because my computer is acting strange. The first time it shut off it acted as if it was installing windows 10 for the first time but then applied a windows update.   Every time I turn it back on after a random shut down it starts with the purple screen and shows the spinning loading screen as if it needs to update windows. After that it goes to the login screen then flashes the purple screen with the loading bar again then loads the desktop. Also my main harddrive was stuck at 100% usage and the PC was running very slow until I found a fix on the internet.   I'm not sure if  I have a nasty virus because antimaleware bytes and windows defender found nothing but the PC behaves like there is. I did use utorrent a hour before the problem happened but I do not know if it is just a coincidence. I also used to have a problem for months where my PC would sometimes not turn on at all until I unplugged and plugged back in all my parts. I stopped turning my PC off and just left it running after that because I just spent a lot of money replacing parts and gifts but I can't tell if it's that old problem just getting worst in some way or something else due to the strange start up behavior.

I have big troubles with mine. I let steam run in online mode and the auto updater has done something to my skyrim and  the creation kit will not work anymore and I tried for weeks to fix it.  Also the harddrive where I have saved my back up data folder and mods for skyrim has failed out of the blue and I lost everything.   I still want to finish what I started but I need to try a way to do it with out using the creation kit.      This edit: A good idea to allow more customization for users who have different wants for fur patterns and different sorts of skin texture mods or wants to add spots to other races is to add overlays. It saves lots of time and work.   I have made a few in place of a freckles mod.   Here are some spots with the size of 4096x4096         With color and transparency.  

  Like that or same white skin and less spot?