PyFFI Optimization

[alako]

Have you guys ever use that program before? Is it effective?

[Sizustar]

Yes, it's effective in what it does.

[jahrn]

Have you guys ever use that program before? Is it effective?

I tried today w a lot of armor/clothing meshes.

Very good improvement w Uglykidcid's BBB meshes, but mixed results w Krista's stuffs and Black Lotus - FPS better, but mesh size bigger than before . Maybe there is a mesh size limit?

[alako]

hummm, I try with Oblivion PyFFI Automator (http://www.tesnexus.com/downloads/file.php?id=20483), but nothing happened. It load all my mesh files, and no change was applied to any of them.

[Sizustar]

hummm' date=' I try with Oblivion PyFFI Automator (http://www.tesnexus.com/downloads/file.php?id=20483), but nothing happened. It load all my mesh files, and no change was applied to any of them.

[/quote']

That thing is outdated

You should try Oblivion - PyFFI Optimization Kit
/>http://www.tesnexus.com/downloads/file.php?id=37463

It's up to ver 7 *Upadted in 03/2011*

[movomo]

Sorry for bumbing out old thread, I wonder if I'm doing PyFFI correctly. It (2.1.11) converts all the tristrips to trishape. Is this right?

I haven't noticed because when I use 2.1.6 PyFFI it stripified the things so I thought 2.1.11 surely stripify them too.

Does trishape have any performance advantage than tristrips?

[gerra6]

Sorry for bumbing out old thread' date=' I wonder if I'm doing PyFFI correctly. It (2.1.11) converts all the tristrips to trishape. Is this right?

I haven't noticed because when I use 2.1.6 PyFFI it stripified the things so I thought 2.1.11 surely stripify them too.

Does trishape have any performance advantage than tristrips?

[/quote']

The best place to ask is probably over in the niftools forum

/>http://niftools.sourceforge.net/forum/

Good people.

[movomo]

The best place to ask is probably over in the niftools forum

/>http://niftools.sourceforge.net/forum/

Good people.

Thank you sir.

Well, you've pyffied your Setbody Reloaded. They are tristrips, not trishape. What version of PyFFI do you use?... or you do something special other than right clicking the file and hit optimize with pyffi?

[gerra6]

The best place to ask is probably over in the niftools forum

/>http://niftools.sourceforge.net/forum/

Good people.

Thank you sir.

Well' date=' you've pyffied your Setbody Reloaded. They are tristrips, not trishape. What version of PyFFI do you use?... or you do something special other than right clicking the file and hit optimize with pyffi?

[/quote']

I believe I grabbed the latest version (probably from the niftools forum) and ran it en-masse on the entire setbody folder.

But it's been awhile.

They're good folks. They were very helpful when I started pestering them with questions during Seam Mender development.

[movomo]

I believe I grabbed the latest version (probably from the niftools forum) and ran it en-masse on the entire setbody folder.

But it's been awhile.

They're good folks. They were very helpful when I started pestering them with questions during Seam Mender development.

Thanks. They were good folks. I posted a question and they answered kindly.

Looks like PyFFI 2.1.11 is supposed to convert to Trishapes. It is better than Tristrips in newer machines.

/>http://niftools.sourceforge.net/forum/viewtopic.php?f=33&t=3967&p=25889#p25889